VIBRATION CONTROL

 

VIBRATION CONTROL NITRILE

Sophisticated manufacturing machines and the need to achieve high productivity levels, without compromising good environmental conditions, requires developing new technologies to isolate and control vibration.

In the past, anchoring equipment to heavy concrete foundations was a common practice due to the lack of suitable materials to isolate vibrations.

Vibration is generally originated in the operation of unbalanced rotary equipment and reciprocating or impact machines. When this equipment remains anchored additional efforts increase wear and transmit disturbance, causing noise and vibration more or less perceptible but always harmful.

Noise and vibration are disturbing factors that:

Tire the worker lowering productivity. Permanently wear out equipment. Damage structures.

Vibration= Higher operation costs Diminished productivity due to workers fatigue Lower life cycle of equipment and facilities

 

 

L Series Vibration Levelers

SERIES VIBRATION LEVELERS NITRILE

It is now possible to control unwanted vibration and compensate for floor irregularities, with one device.*

The elastomer element of the vibration leveler is resistant to oil and chemical agents. Its lifecycle is practically wear free, its metal component is treated to assure a long life cycle.

No fillers (flecha) Unaffected by weather, chemicals, grease and oil

No anchoring (flecha) Lower installation cost.

Unaffected by weather, chemicals, grease and oil. (flecha). Zero maintenance cost.

Uses
Lathes
Mills.
Grinding machines
Presses
Stampers
Plastic and rubber injection machines

Do you wish to relocate your equipment?…just lift it and move it .. that’s it!
L series vibrating levelers, reengineering’s great helper.

 

MODEL MEASUREMENTS IN MM MAXIMUM LOAD
Lbs
D A D SCREW
DL-70 70 24 11 555.5
L-120 110 31 16 2888.8
L-160 160 40 19 7777.7
L-200 208 45 25.4 13333.3

* L series vibration levelers absorb height difference between the equipment’s supports. Still, it is important to note that the support surface on which the vibrating levelers rest should be completely horizontal.

 

 

Neocork ® Elastomer Vibration Isolator

ELASTOMER VIBRATION ISOLATOR NITRILE

Neocork is a hybrid material that combines the vibration isolating properties of cork with the shock absorbing of a balanced mix of elastomers. The result is a material with exceptional vibration isolating properties, which can be used to solve a great number of vibration problems. Delivering high isolation levels (70% to 95%) in most uses, depending of the frequency of the vibrating energy and the load the support receives.


Neocork resists wear due to
Weather
Grease and oil
Chemical agents

Neocork,
The antivibrating plate that responds
More effective
More resistant
Less expensive
Cut it
Position it without adhesives or anchors
Remove it and install it again

 

PRODUCT ID SIZE LOAD
CAPACITY
NEOCORKMR L BLACK 24" x 36" x 1" 3.5 Kg/cm2
NEOCORKMR L BLACK 24" x 18" x 1" 3.5 Kg/cm2
NEOCORKMR H BLUE 24" x 36" x 1" 7.5 Kg/cm2
NEOCORKMR H BLUE 24" x 18" x 1" 7.5 Kg/cm2

 

* The attenuation theory is complex and highly specialized. If you need to know precisely the isolating percentage, you must contact our technical department, we will be glad to help you.